DPA Params

<< Click to Display Table of Contents >>

Navigation:  Program Windows > IQMESH Network Manager Window > Control >

DPA Params

Individual functions correspond to given command of given peripheral described in document IQRF DPA Framework Technical guide.

 

DPA Params

The Indicate traffic via LEDs and Use long timeslot parameters are supported in DPA 4.03 or lower.


 

DPA Hops

Allows specifying fixed number of hops used to send the DPA request/response or to specify an optimization algorithm to compute number of hops.

 

FRC Params

oFast Response Command

Specifies FRC response time i.e. a maximum time reserved for preparing return FRC value (for DPA 2.26 or higher).

oOffline FRC (for DPA 4.15 or higher)

If checked, every FRC is sent as so-called offline FRC. Offline FRC is missing an individual FRC phase, so it takes less time. Enable this feature only for downloading data from Beaming sensors (in Offline mode).