<< Click to Display Table of Contents >> Navigation:  Program Windows > IQMESH Network Manager Window > Control > AutoNetwork > Address assigment examples

Examples of the address assigment when using the MID list and Address space features.

•The Overlapping networks feature is disabled.

oCurrent network already contains Nodes with addresses: 1, 3, 7

oThe Address space: 3, <5,8>, <10,20>

oThe MID filtering must be disabled to be not listed MIDs (in the MID list) added to the network.

 

[a]  One of addresses 2, 4, 6, 10, 11.

[b]  One of addresses 6, 10, 11, 12, 13.

Depending on the order in which a Node with given MID was found.

 

•The Overlapping networks feature is enabled.

oThe Number of networks parameter is set to 2.

oCurrent network 1 already contains Nodes with addresses: 1, 3, 7

oCurrent network 2 is empty.

oAddresses specified in the MID list file are ignored.

oThe Address space: 3, <5,8>, <10,20>

oThe MID filtering cannot be used.

 

[a]  One of addresses 2, 4, 5, 6.

[b]  One of addresses 1, 2, 3, 4.

[c]  One of addresses 5, 6, 8 ,10.

[d]  One of addresses 3, 5, 6, 7.

Depending on the order in which a Node with given MID was found.

 

•Practical example 1

Create a network with 4 repeaters at addresses 1, 2, 3, 4 and 20 sensors from address 50:

oAddress space: <1,4>, <50,69>

oMID list:

  81ABCD06;1

81ABCD09;2

81ABCD0A;3

81ABCD0E;4

oMID filtering disabled

 

•Practical example 2

Add more sensors to the existing network from the example 1:

oAddress space: <50,239> or <70,239>

oMID list: disabled

 

---