When creating a network, the following principles must be observed:
|
Only the compatible combinations of IQRF OS and DPA versions are allowed in all TRs in the whole network. This also applies for all TRs used in tools servicing the network (like CATS). |
It is recommended to always use the latest IQRF IDE version.
IQMESH network creating steps:
1. Uploading the proper files into TRs and configuring TRs
2. Including the Nodes into the network (to assign the addresses - Bonding)
3. Installation of Nodes (placement)
4. Learning the network routing structure (Discovery)
5. Network testing and finalization
Refer to IQRF DPA Framework Technical guide, chapter Network Deployment.