The Node DPA plug-in implements a DPA menu providing uniform and simple device control. It allows you to perform many useful standard actions (e.g. bonding, unbonding, factory setting, reset, standby, …). In addition, the menu can be customized to include also user-defined actions.
The DPA menu is controlled by the MCU pin RB4, active at LOW. Thus, to utilize this feature, the HW of the given Node must allow controlling this pin (e.g. by a pushbutton like DK-EVAL-04A). The indication is made using a standard red LED at RA2, active at HIGH. Refer to Application note AN017 – DPA Menu.