Upload
•The Upload can be canceled by the Alt+X keys (not valid for RFPGM Lite).
Upload Flash + Internal EEPROM from HEX
Upload selected HEX file with data for Flash and internal EEPROM memories into TR module.
Upload Flash from HEX Ctrl+F
Upload selected HEX file (data for Flash memory only) into TR module.
Upload Internal EEPROM from HEX Ctrl+E
Upload selected HEX file (data for internal EEPROM memory only) into TR module.
Upload External EEPROM rrom HEX
Upload selected HEX file (data for external EEPROM memory only) into TR module.
Upload Plug-ins Ctrl+P
Upload selected IQRF files into TR module.
TR Configuration Ctrl+G
Erase
Erase Flash Shift+Ctrl+F
Clears application Flash memory of TR module.
Erase Extended Flash Shift+Ctrl+L
Clears extended Flash memory of TR module.
Erase Internal EEPROM Shift+Ctrl+E
Clears internal user EEPROM memory of TR module (except of Application Info).
Clears external user EEPROM memory of TR module.
Erase Application Info Shift+Ctrl+A
Clears Application Info in EEPROM of TR module.
Auto Upload
Activate/deactivate the Auto Upload function. If checked, IQRF IDE automatically uploads selected HEX, IQRF or XML file into TR module just after detecting programming mode. Auto Upload is automatically disabled if the RF programmer is connected (note). This setting is mutually connected with checkbox in the Project window.
Enter Programming Mode F6
Sets connected TR module in the Programming mode.
RF Programmer