Offline FRC is intended for Beaming sensors. It operates identically as the common
FRC but skips the individual phase within the FRC response.
To select Offline FRC, set the
FrcParams
bit.3 flag in
Set FRC Params DPA command or check the checkbox
IQMESH
Network Manager / Control / DPA Params / FRC Params / Offline FRC in IQRF IDE.
|
Tip:
Use the Offline FRC to address Beaming
sensors only. Otherwise, use the common FRC.
|
» FRC animation
» Offline FRC
animation
» Source code Example
