IQRF OS: 4.00D-08B1 (TR-7xD)
• TR-5xD devices are not supported anymore.
• The demo DPA version is not released anymore.
• DPA for the [CN] device is not released anymore.
Changes and enhancements
• User peripherals do not have to be numbered consequently starting from number 0x20.
• Enumeration response extended by a bitmap specifying implemented user peripheral.
• The interval of allowed PCMD values extended.
• Bonding UserData extended from 2 to 4 bytes at Enable remote bonding and Read remotely bonded module ID.
• Remote bonding can bond up to 7 Nodes. See also Read remotely bonded module ID and RemoteBondingCount.
• MID at Authorize bond extended from 2 to 4 bytes to avoid MID collisions.
• The discovery data address extended to 2 bytes and not multiplied by 16 anymore.
• The meaning of Par1 changed at EEEPROM enumeration.
• The unlimited address range of Extended Read.
• The address range of Extended Write limited to the lower 16 kB of EEEPROM only.
• Changed addresses of Autoexec and IO Setup at EEEPROM.
• IO Setup size extended from 32 to 64 bytes.
• Send FRC returns data from one more extra Node in the case of 1B and 2B FRC commands.
• Slot timing updated according to IQRF OS 4.00.
• Backup and Restore data length increased and AES-128 encrypted using an access password.
• DSM protected and encrypted by an AES-128 using an access password.
• FRC command value is accessible at _PCMD variable.
• CustomDpaHandler-ChangeIQRFOS.iqrf HWPID changed.
• The response that is sent when the device is started is marked by the new asynchronous flag.
• Usage of Write TR Configuration and Write TR Configuration byte inside Batch is not limited.
• Command OS Read additionally returns the shortest and the longest timeslot length.
• New parameter at DpaApiSendToIFaceMaster to specify asynchronous packets.
• Discarded commands:
• CMD_OS_SET_MID (irrelevant at IQRF OS 4.00)
• CMD_OS_SET_USEC (unused at current DSM)
• CMD_EEEPROM_READ (use Extended Read instead)
• CMD_EEEPROM_WRITE (use Extended Write instead)
New features
• Command Set Security.
• Deep sleep feature at Sleep.
• DPA API function DpaApiSetRfDefaults.
• IQRF OS Change process can also change the DPA version at the same time.