|
<< Click to Display Table of Contents >> Navigation: Older Versions > v4.62 |
Release Date: 7.9.2021
•Incorrect visualization of the FRC Extra Result command in the Packet Inspector.
•The IQMESH Network Manager / Table View export was not possible in some specific cases.
•The CATS / RF Scanner / Table export was not possible in some specific cases.
•The Send button in the Terminal DPA Test window was disabled in some circumstances during a connection in the CATS - DSM mode.
•Incorrect value conversion of IQRF Standard Sensors: Temperature, Extra-low voltage, Earth’s magnetic field, Low voltage, Current, Acceleration, Latitude, Longitude
•Non-functional data visualization of IQRF Standard quantities for selective 1B FRC in the Packet Inspector.
•The HWPID 0xC05E (CustomDpaHandler-ChangeIQRFOS-7xD-xxx-xxxxxx.iqrf) could not be used in the IQMESH Network Manager / Upload tool.
•Incorrect timing in the IQMESH Network Manager / Upload. The Load step took an unnecessarily long time.
•Incorrect scanning of WiFi networks in the GW Tool (GW-WIFI-01).
•Minor repairs and improvements.
•Links to the on-line DPA and IQRF Standard documentation was added to the Terminal DPA Test and Packet Inspector. Links refer to the description of the specific PNUM, PCMD, sensor type (quantity), etc.
•The Packet Inspector displays the decimal value of 1, 2, 3, 4 and 8 consecutive bytes from the mouse cursor position.
•New Autonetwork parameters added: Unbond unresponsive Nodes and Skip prebonding
•IQRF OS 4.05D supported.
•DPA 4.16 supported.
•TR-7xG modules supported (beta).
•IQRF OS 4.05G supported (beta).
•New version of compiler included: CC5X Version 3.8 FREE edition.
•Possibility to control compiler options from the source code by the #message '±CC5X [option]'.
•The IQMESH Network Manager / Perform Selected Operations button allows to perform given operation without the selection change using the Shift key.
•The Build Target + Upload hot key was changed from Shift+F10 to Shift+F9.
•The IQRF IDE local cache contains and automatically updates all DPA plug-ins and Custom DPA Handler examples (for DPA 4.13 and higher).
•Possibility to add DPA plug-ins to the project by menu Project / Add DPA Plug-in or by pop-up menu in the Plug-ins section of the Project window.
•Possibility to add a new Custom DPA Handler to the project using a wizard launched by menu File / New.
•The New Project wizard added to the Project menu.