[sync] This command is similar to the Batch but besides, it allows specifying Nodes that execute the batch. This implies that the command is typically used at broadcast. This command is not implemented at the [C] device.
Request
|
NADR |
PNUM |
PCMD |
HWPID |
0 … 29 |
30 … |
n |
|
NADR |
0x02 |
0x0B |
? |
SelectedNodes |
Requests |
0 |
SelectedNodes See identically named field at Send Selective command.
Requests See identically named field at Batch command.
Response
The general response to writing request with STATUS_NO_ERROR Error code.