This command tests the RF signal in the same way as FRC command Test RF Signal. The command is implemented at the [C] device only.
Request
|
NADR |
PNUM |
PCMD |
HWPID |
0 |
1 |
2 … 3 |
|
NADR |
0x02 |
0x0C |
? |
Channel |
RXfilter |
Time |
Channel See the same parameter at Test RF Signal.
RXfilter See the same parameter at Test RF Signal.
Time Time interval to test the signal. The unit is 10 ms.
Response
|
NADR |
PNUM |
PCMD |
HWPID |
ErrN |
DpaValue |
0 |
|
NADR |
0x02 |
0x8C |
? |
0 |
? |
Counter |
Counter See output value of Test RF Signal.