IQMESH Timing Calculator
Input IQMESH Network Parameters
IQRF OS & DPA:
*
IQRF OS 4.03D & DPA 4.10–4.14
IQRF OS 4.04D-4.05D & DPA 4.15–4.17
Total Nodes:
*
Discovered Nodes:
*
FRC Type:
*
2 bits
1 byte
2 bytes
4 bytes
FRC Response Time:
*
40 [ms]
320 [ms]
640 [ms]
1280 [ms]
2560 [ms]
5120 [ms]
10240 [ms]
20480 [ms]
DPA Request data length [bytes]:
*
DPA Response data length [bytes]:
*
Total Nodes must be an integer value from an interval <1;239>.
Discovered Nodes must be an integer value from an interval <0;Total Nodes>.
DPA Request data length must be an integer value from an interval <0;56>.
DPA Response data length must be an integer value from an interval <0;56>.
Resulting IQMESH Timing
Polling time STD [s = hh:mm:ss]:
Polling time LP [s = hh:mm:ss]:
FRC total time STD [s = hh:mm:ss]:
FRC total time LP [s = hh:mm:ss]:
Offline FRC total time STD [s = hh:mm:ss]:
Offline FRC total time LP [s = hh:mm:ss]:
FRC count:
The Longest Total Transmitter On Time
Polling TX On Time STD [s]:
Polling TX On Time LP [s]:
FRC TX On Time STD [s]:
FRC TX On Time LP [s]:
Internal IQMESH Derived Parameters
Total polling hops:
DPA Request timeslot STD [ms]:
DPA Response timeslot STD [ms]:
DPA Request timeslot LP [ms]:
DPA Response timeslot LP [ms]:
This site uses cookies, but only to remember the input numbers entered by the user, so that they do not have to be entered again next time.