[comdown] Runs IQMESH discovery process. The time when the response is delivered depends highly on the number of network devices, the network topology created using specified TxPower, and RF mode, thus, it is not predictable. It can take from a few seconds to many minutes.
Request
|
NADR |
PNUM |
PCMD |
HWPID |
0 |
1 |
|
NADR |
0x00 |
0x07 |
? |
TxPower |
MaxAddr |
TxPower TX Power used for discovery.
MaxAddr Zero-value specifies, that all bonded [Ns] will take part in the discovery process.
The nonzero value specifies the maximum [N] address to be part of the discovery process. This feature allows splitting all [Ns] into two parts: [1] devices having an address from 1 to MaxAddr will be part of the discovery process thus they become routers, [2] devices having an address from MaxAddr+1 to 239 will not be routers. See IQRF OS documentation for more information.
Response
|
NADR |
PNUM |
PCMD |
HWPID |
ErrN |
DpaValue |
0 |
|
NADR |
0x00 |
0x87 |
? |
0 |
? |
DiscNr |
DiscNr Number of discovered network Nodes
Error codes
ERROR_FAIL When
the internal call of discovery fails.
The following video depicts a discovery process.