1 // ********************************************************************* 2 // Custom DPA Handler code example - Using TMR6 MCU timer * 3 // ********************************************************************* 4 // Copyright (c) IQRF Tech s.r.o. 5 // 6 // File: $RCSfile: CustomDpaHandler-Timer.c,v $ 7 // Version: $Revision: 1.33 $ 8 // Date: $Date: 2019/05/06 07:13:14 $ 9 // 10 // Revision history: 11 // 2017/03/13 Release for DPA 3.00 12 // 2016/09/12 Release for DPA 2.28 13 // 2015/08/05 Release for DPA 2.20 14 // 2014/10/31 Release for DPA 2.10 15 // 2014/04/30 Release for DPA 2.00 16 // 17 // ********************************************************************* 18 19 // Online DPA documentation http://www.iqrf.org/DpaTechGuide/ 20 21 // Default IQRF include (modify the path according to your setup) 22 #include "IQRF.h" 23 24 // Default DPA header (modify the path according to your setup) 25 #include "DPA.h" 26 // Default Custom DPA Handler header (modify the path according to your setup) 27 #include "DPAcustomHandler.h" 28 29 // This example initializes TMR6 (at Reset or Init event) and uses it to pulse LED at Idle event. 30 // TMR6 if driven by the internal PIC RC oscillator. See CustomDpaHandler-TimerCalibrated.c for a more precise timer implementation. 31 // This example works only at STD mode, not at LP mode 32 33 // If next symbol is defined then initialize timer at Reset event so it could be used already during Reset events (custom un/bonding) 34 //#define EARLY_INITIALIZATION 35 36 // Must be the 1st defined function in the source code in order to be placed at the correct FLASH location! 37 //############################################################################################ 38 bit CustomDpaHandler() 39 //############################################################################################ 40 { 41 // Handler presence mark 42 clrwdt(); 43 44 // Place for local static variables used only within CustomDpaHandler() among more events 45 static uns8 tmrCounter; 46 47 // Detect DPA event to handle 48 switch ( GetDpaEvent() ) 49 { 50 // ------------------------------------------------- 51 case DpaEvent_Interrupt: 52 // Do an extra quick background interrupt work 53 // ! The time spent handling this event is critical.If there is no interrupt to handle return immediately otherwise keep the code as fast as possible. 54 // ! Make sure the event is the 1st case in the main switch statement at the handler routine.This ensures that the event is handled as the 1st one. 55 // ! It is desirable that this event is handled with immediate return even if it is not used by the custom handler because the Interrupt event is raised on every MCU interrupt and the “empty” return handler ensures the shortest possible interrupt routine response time. 56 // ! Only global variables or local ones marked by static keyword can be used to allow reentrancy. 57 // ! Make sure race condition does not occur when accessing those variables at other places. 58 // ! Make sure( inspect.lst file generated by C compiler ) compiler does not create any hidden temporary local variable( occurs when using division, multiplication or bit shifts ) at the event handler code.The name of such variable is usually Cnumbercnt. 59 // ! Do not call any OS functions except setINDFx(). 60 // ! Do not use any OS variables especially for writing access. 61 // ! All above rules apply also to any other function being called from the event handler code, although calling any function from Interrupt event is not recommended because of additional MCU stack usage. 62 63 // If TMR6 interrupt occurred 64 if ( TMR6IF ) 65 { 66 // Unmask interrupt 67 TMR6IF = 0; 68 // Decrement count 69 if ( tmrCounter != 0 ) 70 tmrCounter--; 71 } 72 73 return Carry; 74 75 // ------------------------------------------------- 76 case DpaEvent_Idle: 77 // Do a quick background work when RF packet is not received 78 79 if ( tmrCounter == 0 ) 80 { 81 // Pulse LEDR every 1.0 s 82 tmrCounter = 1000 / 10; 83 pulseLEDG(); 84 } 85 86 break; 87 88 // ------------------------------------------------- 89 #ifdef EARLY_INITIALIZATION 90 case DpaEvent_Reset: 91 // Called after module is reset 92 // Could be called more times, but initialize Timer only once 93 if ( !TMR6IE ) 94 #else 95 // ------------------------------------------------- 96 case DpaEvent_Init: 97 // Do a one time initialization work before main loop starts 98 #endif 99 { 100 // Setup TMR6 to generate ticks on the background (ticks every 10ms) 101 #if F_OSC == 16000000 102 PR6 = 250 - 1; 103 T6CON = 0b0.1001.1.10; // Prescaler 16, Postscaler 10, 16 * 10 * 250 = 40000 = 4MHz * 10ms 104 #else 105 #error Unsupported oscillator frequency 106 #endif 107 108 TMR6IE = TRUE; 109 } 110 break; 111 112 // ------------------------------------------------- 113 case DpaEvent_AfterSleep: 114 // Called on wake-up from sleep 115 TMR6IE = TRUE; 116 TMR6ON = TRUE; 117 break; 118 119 // ------------------------------------------------- 120 case DpaEvent_BeforeSleep: 121 // Called before going to sleep (the same handling as DpaEvent_DisableInterrupts event) 122 // To minimize the power consumption, no MCU pin must be left as a digital input without defined input level value. 123 // So, unused pins in given hardware should be set as outputs: 124 // Generated by IQRF IDE according to the TR selection in a project 125 #if defined(TR72D) 126 // TR pin C1 (MCU pin RA0): should be set as an output 127 LATA.0 = 0; // Low level 128 TRISA.0 = 0; // Output 129 130 // TR pin C2 (MCU pin RC2): should be set as an output 131 LATC.2 = 0; // Low level 132 TRISC.2 = 0; // Output 133 134 // TR pin C5 (MCU pins RA5, RB4 and RC6 connected in parallel): 135 // All MCU pins can be set as an input, but pin RB4 must be configured with internal pull-up (default activated). 136 TRISA.5 = 1; // Input 137 TRISB.4 = 1; // Input 138 TRISC.6 = 1; // Input 139 140 // TR pin C6 (MCU pin RC3): should be set as an output 141 LATC.3 = 0; // Low level 142 TRISC.3 = 0; // Output 143 144 // TR pin C7 (MCU pin RC4): should be set as an output 145 LATC.4 = 0; // Low level 146 TRISC.4 = 0; // Output 147 148 // TR pin C8 (MCU pins RC5 and RC7 connected in parallel): 149 // Only one MCU pin should be set as an output 150 LATC.5 = 0; // Low level 151 TRISC.5 = 0; // Output 152 TRISC.7 = 1; // Input 153 154 #elif defined(TR76D) 155 // TR pin Q14 (MCU pin RA0): should be set as an output 156 LATA.0 = 0; // Low level 157 TRISA.0 = 0; // Output 158 159 // TR pin Q15 (MCU pin RC2): should be set as an output 160 LATC.2 = 0; // Low level 161 TRISC.2 = 0; // Output 162 163 // TR pin Q4 (MCU pin RC6): should be set as an output 164 LATC.6 = 0; // Low level 165 TRISC.6 = 0; // Output 166 167 // TR pin Q5 (MCU pin RC7): should be set as an output 168 LATC.7 = 0; // Low level 169 TRISC.7 = 0; // Output 170 171 // TR pin Q6 (MCU pin RC3): should be set as an output 172 LATC.3 = 0; // Low level 173 TRISC.3 = 0; // Output 174 175 // TR pin Q7 (MCU pin RC4): should be set as an output 176 LATC.4 = 0; // Low level 177 TRISC.4 = 0; // Output 178 179 // TR pin Q8 (MCU pin RC5): should be set as an output 180 LATC.5 = 0; // Low level 181 TRISC.5 = 0; // Output 182 183 // TR pin Q9 (MCU pin RA5): should be set as an output 184 LATA.5 = 0; // Low level 185 TRISA.5 = 0; // Output 186 187 // TR LED pins Q10 and Q11 (MCU pins RB7 and RA2) are set as outputs by OS. 188 // TR pin Q12 (MCU pin RB4) is set as an input with internal pull-up activated as default. 189 #else 190 #warning Unsupported TR module selected.Modify the pin setting. 191 #endif 192 // ------------------------------------------------- 193 case DpaEvent_DisableInterrupts: 194 // Called when device needs all hardware interrupts to be disabled (before Reset, Restart, LoadCode, Remove bond, and Run RFPGM) 195 // Must not use TMR6 any more 196 TMR6ON = FALSE; 197 TMR6IE = FALSE; 198 break; 199 } 200 201 return FALSE; 202 } 203 //############################################################################################ 204 // Default Custom DPA Handler header; 2nd include to implement Code bumper to detect too long code of the Custom DPA Handler (modify the path according to your setup) 205 #include "DPAcustomHandler.h" 206 //############################################################################################