1 // ************************************************************************** 2 // Custom DPA Handler code example - Using SPI MCU peripheral by OS calls * 3 // ************************************************************************** 4 // Copyright (c) IQRF Tech s.r.o. 5 // 6 // File: $RCSfile: CustomDpaHandler-SPI.c,v $ 7 // Version: $Revision: 1.25 $ 8 // Date: $Date: 2018/10/08 15:56:05 $ 9 // 10 // Revision history: 11 // 2017/03/13 Release for DPA 3.00 12 // 2015/08/05 Release for DPA 2.20 13 // 2014/10/31 Release for DPA 2.10 14 // 2014/04/30 Release for DPA 2.00 15 // 16 // ************************************************************************** 17 18 // Online DPA documentation http://www.iqrf.org/DpaTechGuide/ 19 20 // Default IQRF include (modify the path according to your setup) 21 #include "IQRF.h" 22 23 // Default DPA header (modify the path according to your setup) 24 #include "DPA.h" 25 // Default Custom DPA Handler header (modify the path according to your setup) 26 #include "DPAcustomHandler.h" 27 28 // This example shows how to connect custom peripheral with MCU SPI HW peripheral controlled by IQRF OS 29 30 // Must be the 1st defined function in the source code in order to be placed at the correct FLASH location! 31 //############################################################################################ 32 bit CustomDpaHandler() 33 //############################################################################################ 34 { 35 // Handler presence mark 36 clrwdt(); 37 38 // Place for local static variables used only within CustomDpaHandler() among more events 39 // example: static bit interruptOccured; 40 41 // Detect DPA event to handle (unused event handlers can be commented out or even deleted) 42 switch ( GetDpaEvent() ) 43 { 44 // ------------------------------------------------- 45 case DpaEvent_Interrupt: 46 // Do an extra quick background interrupt work 47 // ! The time spent handling this event is critical.If there is no interrupt to handle return immediately otherwise keep the code as fast as possible. 48 // ! Make sure the event is the 1st case in the main switch statement at the handler routine.This ensures that the event is handled as the 1st one. 49 // ! It is desirable that this event is handled with immediate return even if it is not used by the custom handler because the Interrupt event is raised on every MCU interrupt and the “empty” return handler ensures the shortest possible interrupt routine response time. 50 // ! Only global variables or local ones marked by static keyword can be used to allow reentrancy. 51 // ! Make sure race condition does not occur when accessing those variables at other places. 52 // ! Make sure( inspect.lst file generated by C compiler ) compiler does not create any hidden temporary local variable( occurs when using division, multiplication or bit shifts ) at the event handler code.The name of such variable is usually Cnumbercnt. 53 // ! Do not call any OS functions except setINDFx(). 54 // ! Do not use any OS variables especially for writing access. 55 // ! All above rules apply also to any other function being called from the event handler code, although calling any function from Interrupt event is not recommended because of additional MCU stack usage. 56 57 DpaHandleReturnTRUE: 58 return TRUE; 59 60 // ------------------------------------------------- 61 case DpaEvent_Idle: 62 // Do a quick background work when RF packet is not received 63 64 // Is there anything at SPI received? 65 if ( !getStatusSPI() && _SPIRX ) 66 { 67 if ( _SPICRCok ) 68 { 69 stopSPI(); 70 71 // PeripheralRam[0] stores length of received data 72 PeripheralRam[0] = SPIpacketLength; 73 74 // Limit to max. length of Peripheral RAM 75 if ( PeripheralRam[0] > sizeof( PeripheralRam ) - 1 ) 76 PeripheralRam[0] = sizeof( PeripheralRam ) - 1; 77 78 // Store data to PeripheralRam[1...] 79 copyMemoryBlock( bufferCOM, PeripheralRam + 1, PeripheralRam[0] ); 80 81 // Now data can be read by 82 // 1. reading from Peripheral RAM 83 // 2. by user peripheral _Pnum=PNUM_USER and _PCMD=1 84 } 85 86 startSPI( 0 ); 87 } 88 break; 89 90 // ------------------------------------------------- 91 case DpaEvent_Reset: 92 { 93 // Called after module is reset 94 //goto DpaHandleReturnTRUE; // return TRUE only if you handle node bonding/unbonding 95 static onlyOnce; 96 97 if ( !onlyOnce ) 98 { 99 onlyOnce = TRUE; 100 101 // Enable SPI after reset 102 enableSPI(); 103 bufferCOM[0] = 'R'; 104 bufferCOM[1] = 'e'; 105 bufferCOM[2] = 's'; 106 bufferCOM[3] = 'e'; 107 bufferCOM[4] = 't'; 108 startSPI( 5 ); 109 } 110 break; 111 } 112 113 // ------------------------------------------------- 114 case DpaEvent_Init: 115 // Do a one time initialization work before main loop starts 116 117 PeripheralRam[0] = 0; 118 // SPI stays enabled after reset event 119 bufferCOM[0] = 'I'; 120 bufferCOM[1] = 'n'; 121 bufferCOM[2] = 'i'; 122 bufferCOM[3] = 't'; 123 startSPI( 4 ); 124 break; 125 126 // ------------------------------------------------- 127 case DpaEvent_DpaRequest: 128 // Called to interpret DPA request for peripherals 129 // ------------------------------------------------- 130 // Peripheral enumeration 131 if ( IsDpaEnumPeripheralsRequest() ) 132 { 133 _DpaMessage.EnumPeripheralsAnswer.UserPerNr = 1; 134 FlagUserPer( _DpaMessage.EnumPeripheralsAnswer.UserPer, PNUM_USER + 0 ); 135 _DpaMessage.EnumPeripheralsAnswer.HWPID = 0x000F; 136 _DpaMessage.EnumPeripheralsAnswer.HWPIDver = 0; 137 138 goto DpaHandleReturnTRUE; 139 } 140 // ------------------------------------------------- 141 // Get information about peripheral 142 else if ( IsDpaPeripheralInfoRequest() ) 143 { 144 if ( _PNUM == PNUM_USER + 0 ) 145 { 146 _DpaMessage.PeripheralInfoAnswer.PerT = PERIPHERAL_TYPE_USER_AREA; 147 _DpaMessage.PeripheralInfoAnswer.PerTE = PERIPHERAL_TYPE_EXTENDED_READ_WRITE; 148 _DpaMessage.PeripheralInfoAnswer.Par1 = 0; 149 _DpaMessage.PeripheralInfoAnswer.Par2 = 0; 150 goto DpaHandleReturnTRUE; 151 } 152 153 break; 154 } 155 // ------------------------------------------------- 156 else 157 { 158 // Handle peripheral command 159 if ( _PNUM == PNUM_USER + 0 ) 160 { 161 switch ( _PCMD ) 162 { 163 case 0: 164 // Write one byte from PData to SPI 165 if ( _DpaDataLength != 1 ) 166 goto Error_FAIL; 167 168 bufferCOM[0] = 'C'; 169 bufferCOM[1] = 'm'; 170 bufferCOM[2] = 'd'; 171 bufferCOM[3] = '='; 172 bufferCOM[4] = _DpaMessage.Request.PData[0]; 173 // SPI is enabled from reset event 174 startSPI( 5 ); 175 _DpaDataLength = 0; 176 goto DpaHandleReturnTRUE; 177 178 case 1: 179 if ( _DpaDataLength != 0 ) 180 goto Error_FAIL; 181 182 // Read data originally read from SPI 183 copyMemoryBlock( PeripheralRam + 1, _DpaMessage.Response.PData, _DpaDataLength = PeripheralRam[0] ); 184 goto DpaHandleReturnTRUE; 185 186 default:; 187 // For simplicity reasons we report only one type of error 188 Error_FAIL: 189 DpaApiReturnPeripheralError( ERROR_FAIL ); 190 } 191 } 192 } 193 194 break; 195 } 196 197 DpaHandleReturnFALSE: 198 return FALSE; 199 } 200 //############################################################################################ 201 // Default Custom DPA Handler header; 2nd include to implement Code bumper to detect too long code of the Custom DPA Handler (modify the path according to your setup) 202 #include "DPAcustomHandler.h" 203 //############################################################################################